81
Transom “XX” only
1. Remove the PORT/STBD front water filters
1.
2. Inspect the anode A.
3. Reinstall the front water filters.
NOTE:
Consult your authorized Suzuki Marine Dealer
for inspection and replacement of internal
anodes attached to the cylinder block/cylinder
head.
NOTICE
If anodes are not properly maintained, under-
water aluminum surfaces (such as the lower
unit) will suffer galvanic corrosion damage.
• Periodically inspect anodes to make sure
they have not become detached.
• Do not paint anodes, as this will render
them ineffective.
• Periodically clean anodes with a wire brush
to remove any coating which might
decrease their protective ability.
Front water filter
(STBD)
Front water filter
(PORT)
To Next Page
Loading...
