18
REMOTE CONTROL MODEL
The tension of the remote control handle can be
adjusted according to your preference. To
increase the tension, turn the throttle tension
adjuster A clockwise. To decrease the tension,
turn the adjuster counterclockwise.
IDLE SPEED ADJUSTMENT
The idle speed of your outboard motor has
been factory-adjusted to provide a smooth, sta-
ble idle.
If it is necessary to adjust the idle speed, use
the following procedure.
1. Warm up the engine for about 5 minutes.
2. Make sure that the motor is in “NEUTRAL”
and the throttle control grip is fully closed.
3. Turn the idle adjustment screw A clockwise
to increase idle speed or counterclockwise
to decrease idle speed.
NOTE:
If idle speed cannot be set within the specified
range, contact your authorized Suzuki Marine
Dealer.
Idle speed
(in Neutral)
900 – 1000
r/min. (min
–1
)
To Next Page
Loading...
