Suzuki DR600S - Page 50

SERVICING ENGINE 3-16
@
Flatten
the
lock
washer
and
remove
the
clutch
sleeve
hub
nut
by
using
the
special
tool.
Clutch sleeve hub holder
[ 09920-53722
e Remove the clutch sleeve hub, clutch plates and
pressure plate along with the primary driven
gear assembly.
e@ Remove the primary drive gear nut while hold-
ing the conrod with a conrod holder.
e@ Remove the washer, primary drive gear and key.
09910-20116 Conrod holder
NOTE: |
This is a left-hand thread nut.
@ Remove the cam drive chain, cam drive sprocket
and key.