Suzuki DR600S - Page 51

3-17 SERVICING ENGINE
e@ Remove the idle gear and oi! pump driven gear
by removing the circlips.
e@ Remove the oil pump mounting screws with an
impact driver.
09900-06107 Snap ring pliers
e Remove the oil sump filter cap and oil sump
filter by removing the bolts and screws.
e@ Remove the crankcase securing bolts.
© Separate the crankcase into 2 parts, right and
left with a crankcase separating tool.
09920-13120 Crankcase separating tool
i
7
NOTE:
Fit the crankcase separating tool, so that the
tool plate is parallel with the end face of the
crankcase.
CAUTION:
The
crankshaft
and
transmission
components
must
remain
in
the
right
crankcase
half.
This
is
necessary
because
the
gearshift
cam
stopper
is
mounted
on
the
right
crankcase
half
and
will
be
damaged
if
the
transmission
compo-
|_Nents
remain
in
the
left
half.