2-13
SWITCHING COMMUNICATION MODE IN
REMOTE CONTROLLER
To change the communication mode, push
the remote controller button 1 for one sec-
ond or more.
Communication mode:
You may use keyless start system. When
you push the button 1 for a moment, indica-
tion light 2 turns on momentarily. When
switching to the stop mode, the indication
light 2 stays on for a certain time.
Stop mode:
You cannot use keyless start system. When
you push the button 1 for a moment, the
indication light 2 stays on for a certain time.
When switching to the communication
mode, the indication 2 light turns on
momentarily.
NOTICE
The remote controller is a precision
device equipped with electronic parts to
transmit radio signal. To avoid malfunc-
tion of the remote controller, observe the
following points for the handling:
• Do not bend or otherwise expose
remote controller to large shock.
• Do not place remote controller where it
will be exposed to direct sunlight, high
temperatures and humidity.
• Do not shave or drill remote controller.
• Do not attach magnetized key holder
etc.
To Next Page
Loading...
