Need help?Do you have a question about the Suzuki RGV250 and is the answer not in the manual?
General| Displacement | 249 cc |
|---|---|
| Transmission | 6-speed |
| Front Brakes | Dual Discs |
| Rear Brakes | Single Disc |
| Frame | Aluminum Twin-Spar |
| Cooling System | Liquid-cooled |
| Fuel System | Mikuni Carburetors |
| Ignition | CDI |
| Front Suspension | Telescopic forks |
| Rear Suspension | Swingarm with monoshock |
| Engine Type | 2-stroke, V-twin |
Main battery unit for the motorcycle.
The complete air intake cleaner unit.
Various tubes and clamps for the air cleaner system.
The main alternator assembly.
Rotating part of the alternator.
Voltage regulator for the alternator.
The drive chain for the camshaft.
Component that maintains tension on the cam chain.
Shafts controlling valve operation.
Components controlling gas flow into/out of cylinders.
Springs for valve operation.
Levers and rods for carburetor control.
Hoses and fittings for fuel delivery.
Various carburetor assemblies (LH, ML, MR, RH).
Components for fuel and air mixture.
Part controlling fuel level in the carburetor.
Hub for the clutch sleeve.
Plates that engage/disengage the clutch.
Springs and rods for clutch operation.
Complete cooling fan unit.
Housing and ducting for the cooling fan.
Unit controlling the fan motor.
Braces and nuts for cowling attachment.
Fasteners and clips for cowling panels.
Side panels of the motorcycle cowling.
Upper center panel of the cowling.
Shields and moldings for the cowling.
Cover for the clutch, includes gaskets.
Cover for signal generator, includes gaskets.
Main engine crankcase assembly.
Various bolts and studs for the crankcase.
Jets for oil circulation within the crankcase.
Assembly connecting piston to crankshaft.
Bearings supporting the crankshaft.
Piston and ring sets for the engine.
Relay and cover for the starting motor.
Ignition coils and associated spacers.
Caps and seals for spark plugs.
Assembly for the front footrests.
Bars for the rear passenger footrests.
Various frame cover panels.
Emblems attached to frame covers.
Cushions and screws for frame covers.
The main motorcycle frame structure.
Bridge tube and plates for frame.
Grips for frame sections.
Hoses for the front brake system.
Joints and clamps for brake hoses.
The motorcycle's front brake calipers.
Sets for caliper pistons and seals.
Sets of brake pads for calipers.
Assemblies for front fork suspension dampers.
Outer tubes and oil seals for front forks.
Springs and collars for front fork suspension.
The main front fender panels.
Braces and cushions for the front fender.
Complete front wheel unit.
Disc for the front wheel brake.
Valve for the front wheel rim.
The main fuel control valve.
Unit for measuring fuel level.
Various fuel tank assemblies.
Shields and brackets for the fuel tank.
Set for the fuel tank cap.
Forks that move gears for shifting.
Cam and poles for gear shifting mechanism.
Plates that stop gear shift movement.
Main handlebar units (RH/LH).
Balancers and cushions for handlebar.
Mirrors and control cables for handlebars.
Lever assembly for the brake control.
Lever assembly for the clutch control.
Knockers and springs for handle levers.
Switch assemblies on the handlebar.
Lock mechanism for the handlebar.
The cover for the cylinder head.
Gaskets for the cylinder head cover.
Plugs and breather for the head cover.
The main cylinder head unit.
Guides and rings for cylinder valves.
Ignition plugs for combustion.
The complete motorcycle headlamp unit.
Bulbs and sockets for the headlamp.
Brackets and reflector for the headlamp.
The complete exhaust system.
Muffler body and connection parts.
Parts for mounting the muffler.
The motorcycle's oil cooling unit.
Hoses for the oil cooler system.
Cushions and bolts for the oil cooler.
The oil sump for the engine.
Gaskets and plugs for the oil pan.
Strainer and protector for engine oil.
The engine oil pump unit.
Filter and pipes for the oil pump.
The motorcycle's rear brake calipers.
Sets for rear caliper pistons and seals.
Sets of brake pads for rear calipers.
The main rear fender panel.
Mudguard attached to the rear fender.
Holders and screws for the rear fender.
Unit controlling rear brake fluid.
Tank and diaphragm for brake fluid.
Hoses and bolts for the master cylinder.
Lever set for rear suspension cushion.
Bearings and spacers for the lever.
Assemblies for rear shock absorbers.
Complete rear wheel unit.
Disc and sprocket for rear wheel brake.
Valves and balancers for the rear wheel rim.
The main seat unit for the motorcycle.
Lock mechanism and cable for the seat.
Handles for the pillion rider.
Assembly for the ignition control.
Stator and rotor components of the generator.
Assemblies for speed and fuel meters.
Switches and cases for the speedometer.
The main center stand.
The side prop stand.
Rubber cover for the brake pedal.
Idle gear for the starter clutch.
The complete starter clutch assembly.
The motorcycle's starting motor.
Holders and brushes for the starting motor.
The main steering stem unit.
Bearings and seals for the steering stem.
The main rear swinging arm.
Bearings and spacers for the swinging arm pivot.
Guards and adjusters for the drive chain.
Assemblies for rear tail and turn signal lamps.
Lamp units and sockets for rear lighting.
Lamp for the license plate.
Shafts and gears for power transmission.
Shafts and gears transmitting power.
Bearings and seals for the transmission.
Assemblies for front turn signal lamps.
Assemblies for rear turn signal lamps.
Relay for the turn signal system.
Cowling panels located underneath the motorcycle.
Shields and brackets for under cowling.
To Next Page
