3-9
Gear Position Indicator 5
The gear position indicator indi-
cates gear position. This indica-
tor displays “N” when the
transmission is in neutral.
NOTE: When the display indi-
cates “CHEC” in the odometer
display area, the gear position
indicator does not indicate a num-
ber but indicates “–”.
Oil Pressure Indicator “
” 6
When the ignition switch is in the
“ON” position but the engine has
not been started, the symbol
“
” 6 in the display and the
indicator light G comes on. As
soon as the engine is started, the
symbol “
” 6 and the indicator
light should go out.
When the engine oil pressure
drops under the normal operating
range, the symbol “
” 6 in the
display appears and the indicator
light G comes on.
Turn Signal Indicator Light
“
” 7
When the turn signals are being
operated either to the right or to
the left, the indicator light will blink
intermittently.
NOTE: If a turn signal light is not
operating properly due to bulb fila-
ment or circuit failure, the indica-
tor light blinks more quickly to
notify the rider of the existence of
a problem.
NOTICE
Riding the motorcycle with the
oil pressure indicator light lit
can damage the engine and
transmission.
If the oil pressure indicator
light comes on, indicating low
oil pressure, stop the engine
immediately. Check the oil level
and add oil if necessary. If
there is a proper amount of oil
and the light still does not go
out, have your authorized
Suzuki dealer or a qualified
mechanic inspect your motor-
cycle.
To Next Page
Loading...
