3-29
REAR SUSPENSION
Spring Pre-load Adjustment
The rear suspension spring pre-
load is adjustable to compensate
for rider, load, riding style and
road conditions. The spring pre-
load is adjustable to seven posi-
tions. To change the spring pre-
load setting, place the motorcycle
on the side stand. Twist the spring
tension ring to the desired posi-
tion with the spring adjuster. Posi-
tion 1 provides the softest spring
tension and position 7 provides
the stiffest. This motorcycles is
delivered from the factory with its
adjuster set on position 3.
Rear Suspension Label
NOTE: Ask your Suzuki dealer to
dispose of the rear suspension
unit.
WARNING
This unit contains high-pres-
sure nitrogen gas.
Mishandling can cause explo-
sion.
• Keep away from fire and heat.
• Read owner’s manual for
more information.
To Next Page
Loading...
