7-40
Front axle tightening torque:
65 N·m (6.5 kgf-m, 47.0 lbf-ft)
Front axle holder bolt tightening
torque:
23 N·m (2.3 kgf-m, 16.5 lbf-ft)
Front brake caliper mounting bolt
tightening torque:
39 N·m (3.9 kgf-m, 28.0 lbf-ft)
REAR WHEEL REMOVAL
WARNING
If the bolts and nuts are not
properly tightened, the wheel
can come off, causing an acci-
dent.
Be sure to tighten the bolts and
nuts to the specified torque. If
you do not have a torque
wrench or do not know how to
use one, ask your authorized
Suzuki dealer to check the
bolts and nuts.
CAUTION
A hot muffler can burn you.
Wait until the muffler cools
before removing the axle nut.
NOTICE
Removing the rear wheel with-
out use of an accessory stand
can result in your motorcycle
falling over and being dam-
aged.
Do not attempt roadside
removal of the rear wheel. Only
remove the rear wheel at a
properly equipped servicing
facility using an accessory ser-
vice stand.
To Next Page
Loading...
