3-8
INSTRUMENT PANEL
The malfunction indicator light 8,
engine coolant temperature indi-
cator/oil pressure indicator light
G, ABS indicator light H
(SV650A), and LCD’s work as fol-
lows to confirm their function
when the ignition switch is turned
to the “ON” position.
• The malfunction indicator light
8 comes on for 3 seconds.
• All LCD segments appear and
then show the normal display.
Tachometer 3
The tachometer indicates the
engine speed in revolutions per
minute (r/min).
Press and hold the SEL button 1
and turn on the ignition switch.
Hold the SEL button 1 for 4 sec-
onds to switch tachometer display
pattern setting mode.
To change the display pattern,
push the SEL button 1. The dis-
play pattern changes in the order
below.
Normal
→ Peak hold → Normal
Push the ADJ button 2 to exit the
tachometer display pattern setting
mode.
Speedometer 4
The speedometer indicates the
road speed in miles per hour or
kilometers per hour.
NOTE:
• Set the meter A to odometer,
then press and hold the SEL
button 1 for 2 seconds to
switch between mph and km/h.
At the same time, the odome-
ter will be changed between
mile and km.
• Select mph or km/h, as appro-
priate, to comply with traffic
regulations.
• Check mph and km/h display
after adjusting the instrument
panel display.
To Next Page
Loading...
