3-14
Instrument panel light
brightness
Set the meter to instrument panel
light brightness, then press and
hold the SEL button 1 for 2 sec-
onds until the “
” mark indicators
blink. Pushing the SEL button 1
will change the instrument panel
light brightness in 6 steps. The
brightness indicator indicates
brightness from “
” (min) to
“
” (max). Press and
hold the SEL button 1 for 2 sec-
onds to return to instrument panel
light brightness mode.
Fuel Level Indicator “
” B
The fuel level indicator indicates
the amount of fuel remaining in
the fuel tank. The fuel level indica-
tor displays all 6 segments when
the fuel tank is full. The mark
blinks when the fuel level drops
below 4.2 L (4.4 US qt). The mark
and segment blink when the fuel
drops below 1.7 L (1.8 US qt).
NOTE:
• The fuel level indicator will not
indicate correctly when the
motorcycle is placed on the
side stand. Turn the ignition
switch to the “ON” position
when the motorcycle is held
upright.
• If the fuel mark blinks, fill the
fuel tank immediately. Also, the
last segment of the fuel level
indicator blinks when the fuel
tank is almost empty.
WARNING
Changing the display while
riding can be hazardous.
Removing a hand from the han-
dlebars can reduce your ability
to control the motorcycle.
Never change the display while
riding. Keep both hands on the
handlebars.
Fuel tank
Approximately
1.7 L
Approximately
4.2 L
Full
Segment
Blink
mark
Blink Blink
To Next Page
Loading...
