3-16
Instantaneous Fuel
Consumption Meter and
Average Fuel Consumption
Meter
To change between “MPG” and
“km/L (L/100km)”, set the meter
A to odometer, then press and
hold the SEL button 1 for 2 sec-
onds. At the same time, the
odometer will be changed
between mile and km.
To change between “MPG US”
and “MPG IMP”, “km/L” and “L/
100km” set the meter C to either
instantaneous fuel consumption
meter or average fuel consump-
tion meter and hold the ADJ but-
ton 2 for 2 seconds.
Instantaneous fuel
consumption meter
The instantaneous fuel consump-
tion meter displays the fuel con-
sumption value only when the
motorcycle is moving. However,
when the motorcycle is stopping,
the fuel consumption meter dis-
plays “– – . –”. This meter ranges
from 0.1 to 50.0 (km/L), or from
0.1 to 99.9 (MPG US, IMP).
NOTE: The display shows esti-
mated values. Indications may not
be the same as actual values.
Average fuel consumption
meter
The average fuel consumption
meter displays average fuel con-
sumption ratio of trip A or trip B.
The average fuel consumption
meter ranges from 0.1 to 50.0
(km/L), or from 0.1 to 99.9 (MPG
US, IMP). The average fuel con-
sumption meter indicates “– – . –”
when the trip meter indicates 0.0.
To reset the fuel consumption
meter, reset the trip meter.
NOTE: The display shows esti-
mated values. Indications may not
be the same as actual values.
To Next Page
Loading...
