7-76
INSPECTION AND MAINTENANCE
80SS5-01E
52RS70050
(7) Removal
(8) Installation
4) To remove and install the bulb of the
rear turn signal light (5) or the reversing
light (6), simply pull out or push in the
bulb.
52RM70190
NOTE:
When reinstalling the light housing, check
that the clips are properly attached.
License plate light
LED type
52RM90001
Since special procedures are required, it is
recommended that you take your vehicle
to an authorized SUZUKI dealer for light
replacement.
(5) / (6)
(7)
(8)