7-77
INSPECTION AND MAINTENANCE
80SS5-01E
Bulb type
52RM70070
1) Remove the cover (1) by turning it
counterclockwise.
76MH0A126
2) To remove and install the bulb of the
license plate light (2), simply pull out or
push in the bulb.
High-mount stop light
LED is used. It is recommended that you
take your vehicle to an authorized SUZUKI
dealer for light replacement since special
procedures are required.
Rear fog light (if equipped)
52RM70350
1) Remove the clips (1) in rear bumper by
using a flat blade screwdriver as shown
in the illustration.
(1)
(2)
To Next Page
Loading...
Need help?
General
