3-23
BEFORE DRIVING
69TB-01E
NOTE:
• Avoid covering the light sensor area of
the windshield with a sticker. The sticker
may impair the performance of the sen-
sor and make the system unable to con-
trol operation of the lights correctly.
• If you changed the ignition mode to ON
by pressing the engine switch and
“AUTO” position remains selected, the
headlights, position lights, tail lights and
license plate light come on automatically
as it gets dark outside, even with the
engine not running. Leaving the lights lit
for a long time may lead to a completely
discharged battery.
(3)
Front position lights, tail lights, license
plate light and instrument lights are on, but
headlights are off.
(4)
Front position lights, tail lights, license
plate light, instrument lights and headlights
are on.
69T030240
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) and pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument cluster will come on. To
momentarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
NOTE:
The high beam assist will be activated
when the lighting switch is in “AUTO” posi-
tion. Refer to the “High beam assist” (P.5-
92).
Auto-on headlight system
69T030180
The auto-on headlight system automati-
cally turns on all lights that are operated by
the lighting switch, when the following
three conditions are all met.
Conditions for auto-on headlight system
operation:
1) It is dark around the light sensor (5).
2) The lighting switch is in “AUTO” posi-
tion.
3) You press the engine switch to change
the ignition mode to ON.
This system is activated by a signal from
the light sensor (5) on the passenger’s
seat side of instrument panel. Do not cover
the sensor (5). Otherwise, the system will
not work correctly.
CAUTION
If the light sensor area of the wind-
shield is covered with mud, ice, or
other similar substances, the head-
lights, position lights, tail lights and
license plate light may be turned on
even when it is still light outside.
(5)
To Next Page
Loading...
Need help?
General
