5-56
OPERATING YOUR VEHICLE
69TB-01E
NOTE:
If the adaptive cruise control is in standby
condition:
69T050080
• When the adaptive cruise control is in
standby condition (the adaptive cruise
control indicator (d) illuminates in white),
press the driving assist mode select
switch (1) to switch from adaptive cruise
control to speed limiter.
• When the adaptive cruise control is acti-
vated (the adaptive cruise control indica-
tor illuminates in green), the driving
assist mode cannot be switched from
adaptive cruise control to speed limiter.
69T050570
2) Using the accelerator pedal, accelerate
or decelerate to the desired vehicle
speed (approximately 30 km/h (19
mph) or more), and press the driving
assist switch (2) to set the set vehicle
speed.
69T050020
The speed limiter indicator (c) will
change from illuminated in white to
green. The set vehicle speed (b) will be
displayed on the information display (a)
in green. If the vehicle speed is set
while driving at below approximately 30
km/h (19 mph), the set vehicle speed
will be set to approximately 30 km/h
(19 mph).
(2)
(b) (c)
To Next Page
Loading...
Need help?
General
