2-40
FOR SAFE DRIVING
69TB-01E
Detailed information for child restraint system
#1 When installing the child restraint systems, only a front-facing child restraint is suitable.
#2 Pull upward the head restraint until it clicks.
#3 Remove the head restraint.
#4 The front seat should be positioned between foremost and 9 notches rearward of foremost position.
Key of letters to be inserted in the above table
YES =Suitable for this seating position
NO = Not suitable for this seating position
X =ISOFIX position is not suitable for ISOFIX child restraint systems in this fixture.
The child restraint system can be used in the seating positions for fixture shown in the above table.
For child restraint system fixtures, confirm the table of next page.
Seat position number
Seating position
Seating position suitable for universal belted
(YES/NO)
YES (#1) YES YES YES
i-Size seating position
(YES/NO)
NO YES NO YES
Seating position suitable for lateral fixture
(L1/L2)
NO X NO X
Suitable rear-facing fixture
(R1/R2X/R2/R3)
NO
R1, R2 (#2)
NO
R1, R2 (#2)
R2X (#3) R2X (#3)
R3 (#2, #4) R3 (#2, #4)
Suitable front-facing fixture
(F2X/F2/F3)
NO
F2,F3 (#2)
NO
F2,F3 (#2)
F2X (#3) F2X (#3)
Suitable booster fixture
(B2/B3)
B2, B3 B2, B3 B2, B3 B2, B3
To Next Page
Loading...
Need help?
General
