2-45
FOR SAFE DRIVING
69TB-01E
59RN02140
5) Insert the tongue plate (3) firmly into the
seat belt buckle (4) until you hear a
click.
•The child restraint system in the above
figure is a typical example.
6) Make sure the child seat is installed
properly according to the instructions
provided by the child restraint system
manufacturer.
•If the child restraint system is not
installed properly, consult the retailer
where you purchased the child
restraint system.
Securing child restraint system by
ISOFIX
Securing
69T020160
(1) Lower anchorages
Your vehicle is equipped with the lower
anchorages in the rear seat outboard seat-
ing positions for securing a ISOFIX
*1
type
of child restraints with the connecting bars.
The lower anchorages are located where
the rear of the seat cushion meets the bot-
tom of the seatback.
Install the ISOFIX type child restraint sys-
tem according to the instructions provided
by the child restraint system manufacturer.
After installation, try moving the child
restraint system in all directions especially
forward to check that connecting bars are
securely latched to the anchorages.
69T020170
(2) Top tether anchorages
Your vehicle is equipped with the top tether
anchorages. Use the top tether strap of the
child restraint according to the instructions
provided by the child restraint system man-
ufacturer.
(3)
(4)
WARNING
If child restraint systems are not
installed properly, children or other
occupants could be seriously injured
in the event of an accident. Secure
the child restraint system firmly
according to both this manual and
the instruction provided by child
restraint system's manufacturer.
(1)
To Next Page
Loading...
Need help?
General
