Suzuki T250 User Manual

Guidelines for initial riding to ensure proper engine break-in.

Details on fuel type and recommended lubrication oil for the Posi-Force system.

Importance of using genuine Suzuki parts for optimal performance and reliability.

Graphs showing output and torque versus engine RPM for the T250 model.

Graphs illustrating output and torque versus engine RPM for the T350 model.

Physical measurements and clearances for T250 and T350 models.

Engine type, displacement, bore/stroke, compression, power, and torque for both models.

Details on fuel system components and engine/gearbox lubrication methods.

Specs for ignition system, clutch, gearbox, and gear ratios.

Details on suspension, steering geometry, and brake system types.

Specs for generator, battery, lamps, and indicators.

Detailed explanation of how the Posi-Force lubrication system operates.

Procedures for inspecting and repairing cylinder head warpage and gasket installation.

Method for checking cylinder wear using a cylinder gauge and reboring requirements.

Instructions for installing the piston, noting its off-center pin.

Procedure for inspecting piston ring end gap and its importance and installation.

Information on the oil pump, including performance curves and control cable adjustment.

Procedures for inspecting clutch components like cork plates and axial play.

Procedure for measuring the carburetor float level for correct fuel mixture.

Guidelines for adjusting carburetor mixture based on throttle opening and altitude.

Explanation of the AC generator's function and wiring diagram.

Technical data for the AC generator including weight, contact gap, and charging ampere.

Procedure for inspecting and setting the ignition timing for optimal performance.

Method for testing the silicon rectifier's conductivity and identifying defects.