Four speeds are available: High / Medium / Low / Auto.
If the appliance is cooling only model, the unit operates in Fan mode
when the room temperature is below 23
℃
(73
℉
), and Cool mode when
the room temperature is above 23
℃
(73
℉
).
If the appliance is cooling and heating model, the unit operates in Heat
mode when the room temperature is below 20
℃
(68
℉
), and Fan mode
when the room temperature is from 20
℃
(68
℉
) to 23
℃
(73
℉
), and
Cool mode when the room temperature is above 23
℃
(73
℉
).
SWING function
This function is useful for select the up/down swing of air delivery.
To set this function correctly:
● Select the operating mode (Cool, Dry, Fan) as described above.
● Press the button the deflector will stop different positions or swing continuously.
SLEEP function
This function is useful for the night as it gradually reduces operation of the appliance.
To set this function correctly:
● Select the cool or heat mode as described above.
● Press the button.
The appliance operates in the previously selected mode.
When you choose the sleep function, the screen will reduce the brightness
，
and the fan speed is low.
The SLEEP function maintains the room at optimum temperature without excessive fluctuations in either
temperature or humidity with silent operation. Fan speed is always at Low, while room temperature and
humidity vary gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by 1
℃
(1
℉
) per hour in a 2 hour period. This
new temperature will be maintained for the next 6 hours. Then the appliance turn it off.
When in HEAT mode, the selected temperature will decrease by 1
℃
(1
℉
) per hour in a 3 hour period. This
new temperature will be maintained for the next 5 hours. Then the appliance turn it off.
To Next Page
Loading...
