Select the required program options and press the Start/Pause button to
commence drying. The dryer will pause after pressing the button again or
opening the door while the program is running. When the machine is
suspended, Program Selection Dial and other keys are invalid except
Start/Pause, Anti Crease and Buzzer keys. To re-start the program, press the
Start/Pause button once again.
The display shows the following information:
⚫ Program duration
After you have selected the program, its duration (in hours and minutes)
appears on the display.
It is calculated automatically on the basis of the maximum load accepted for
each type of fabric and
of the required degree of drying. When the program starts, the remaining
time is displayed.
⚫ Delay start
If you have selected a delay time, the remaining time is displayed. Once you
press the “Start/Pause” button, the appliance will start the delayed process. If
you want to check the program selected, please press the “Start/Pause”
button once more. And the time of selected program shows.
⚫ Incorrect option selection,
If you select an option that is incorrect or not
compatible with the program you have selected, the signal will sound
as “Bi,Bi,Bi” to shows Ers (error).
These lights indicate the following functions:
⚫ Drying light" “, this light indicates that the appliance is in the drying
⚫ phase.
⚫ Cooling light " “, this light indicates that the appliance is in the cooling
phase. At the end of drying, there is 10 minutes cooling phase to cool
the laundry.
⚫ End of program light " ", this light is on at the end of the cooling
phase. This phase contains 30 minutes default anti crease except Cotton
program, users can take out clothes anytime.
⚫ Anti-Crease light " ", this light is on when Anti Crease function is
selected. In addition to Cotton program.
To Next Page
Loading...
