Depending on the program, different functions can be combined. These must
be selected after choosing the desired program and before depressing the
Start/Pause button. When these buttons are pressed, the corresponding
indicator lights come on. When they are pressed again, the indicator lights go
out.
⚫ The buzzer can be selected during normal use. Press the “Buzzer” button
to turn off the buzzer and corresponding light. Press once again to activate
the buzzer and corresponding light. A sound will be emitted.
⚫ The “Buzzer” key is pressing Anti Crease and Delay Start at the same
time for 5second.
⚫ Before you start the machine, you can choose the dry level. The dry level
is divided into three grades:
( Heavy Strong Normal )
⚫ This option is only suitable to the five programs: Daily, Cotton, Synthetic,
Bulky Item, Towel.
Anti-crease is a default setting at the end of each program. Longer Anti-crease
can be selected while the program is in standby or running.
This button allows you to delay the start of the program by up to 24 hours (each
time the button is pressed the time is increased by 1 hour). This option must be
selected after setting the required program and before pressing Start/Pause to
commence drying. When Start /Pause is pressed, the corresponding indicator
lights start to flash, and countdown begins.
Delay
cancelled 1 2 3•••23
24
The countdown begins after you have pressed the Start/Pause button. The
corresponding light illuminates when you have pressed this button. All indicator
lights go out except Delay Start pilot light.
To Next Page
Loading...
