What to do if my Sven 230 has no sound?
If there's no sound coming from your Sven Speaker System, or the sound is very quiet, first check if the volume is set to the minimum. If it is, simply adjust the volume control knob. Also, ensure that the audio source is correctly connected.
How to fix a Sven Speaker System that does not turn on?
If your Sven Speaker System isn't turning on, make sure that it is properly connected to a mains outlet. If it is, check that the power switch is turned on.
Why is the sound distorted on my Sven 230?
Sound distortion on your Sven Speaker System typically occurs when the input signal's amplitude is too high. To resolve this, reduce the volume both from the audio source and on the Speaker System itself.
Instructions for positioning the speakers symmetrically and at a safe distance from monitors or TVs.
Guidance on connecting the speaker system to various audio sources using appropriate cables and adapters.
Details common issues like no power or sound distortion, with corresponding causes and resolutions.
General| Type | 2.1 |
|---|---|
| Frequency Response | 40Hz - 20kHz |
| Impedance | 4 Ohm |
| Input Connectors | 3.5 mm |
| Signal-to-Noise Ratio | 75 dB |
| Satellite Power Output | 5W (RMS) per satellite |
To Next Page
