EasyManua.ls Logo

Sven 230 - Troubleshooting; Common problems and solutions; Technical Specifications

Sven 230
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If none of the above methods can solve the problem, please seek professional advice at your
nearest service center. Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound or there
is too quiet sound
of speakers.
Distortion of
sound.
Cause
The MSS isn’t connected to a mains outlet.
The power switch is o.
The volume level is set at minimum value.
Improperly connected audio source.
Large amplitude of the input signal.
Solution
Check the connection.
Turn on the switch.
Adjust the volume control knob.
Connect audio sources correctly.
Turn down the source volume
and the MSS volume.
6. TROUBLESHOOTING
Parameter, measurement unit
Вихідна потужність (RMS), Вт
Frequency range, Hz
Speaker diameter, mm
Voltage supply, V/Hz
Dimensions (one speaker) (W × H × D), mm
Weight, kg
Value
4 (2 × 2)
100 – 20,000
50 × 90
~ 220/50
65 × 200 × 60
0,55
Notes:
Technical specications given in this table are supplemental information and cannot give
occasion to claims.
Technical specications and package contents are subject to change without notice due
to the improvement of SVEN production.
7. TECHNICAL SPECIFICATIONS
Adjust the VOLUME knob VOLUME d to the necessary volume.
Plug headphone into the headphone jack c (see g. 1).
Notes:
• After nishing operation with MSS, mind to unplug power cord of the device from the
mains socket.
• To improve sound quality, use Line-Out output of sound card.
ENG
4
2.0 Multimedia
Speaker System

Related product manuals