What to do if the Sven Speaker System remote control is not working?
If the Sven Speaker System remote control isn't working, the most likely reason is a discharged battery. Try replacing the battery with a new one.
Why is there no sound from my Sven Speaker System or the sound is too quiet?
If your Sven Speaker System isn't producing any sound, or the sound is very quiet, there are a couple of things to check. First, make sure the volume isn't set to the minimum. If it is, adjust the volume control. Also, verify that the audio source is properly connected.
How to fix sound distortion on Sven Speaker System?
If you're experiencing sound distortion with your Sven Speaker System, it might be due to a large amplitude of the input signal. Try turning down the volume on both the source and the speaker system itself.
Why my Sven Speaker System does not turn on?
If your Sven Speaker System isn't turning on, it could be due to a couple of reasons. First, ensure that the system is properly connected to a mains outlet. Also, check that the power adapter is correctly connected.
What to do if the audio lags in Sven Speaker System Bluetooth video streaming mode?
The audio track lagging behind the image during Bluetooth video streaming with your Sven Speaker System is due to technical limitations of the Bluetooth chipset. Consider using an audio connection via HDMI (ARC), an optical cable, or a signal cable instead.
General| Total Power Output (RMS) | 40 W |
|---|---|
| Subwoofer Power | 20 W |
| Power supply | AC 220 V |
| Signal-to-Noise Ratio | ≥ 75 dB |
| Input Sensitivity | 500 mV |
| Type | Speaker System |
| Satellite Power | 10 W x 2 |
| Frequency Response | 40Hz - 20kHz |
| Material | plastic |
To Next Page
