Sven SB-2040A - Technical Specifications; Troubleshooting

ENG
8
Soundbar
6. TROUBLESHOOTING
Problem Cause Solution
The system
doesnotturn on.
The system is not connected
to a mains outlet.
Check the connection.
The power adapter
isnotconnected.
Connect the power adapter.
No sound or the sound
is too quiet.
Volume level is set
atminimum value.
Adjust the volume control knob.
Improperly connected audio
source.
Connect the audio sources
correctly.
Distortion of sound. Large amplitude of the input
signal.
Turn down the source volume
andthe MSS volume.
The remote control
isnot working.
The battery is discharged. Replace the battery with a new one.
The audio track lags
behind the image
in Bluetooth video
streaming mode.
Technical limitations
oftheBluetooth chipset.
Use an audio connection via HDMI
(ARC), an optical cable, or a signal
cable.
If none of the above methods can solve the problem, please seek professional advice at your near-
est service center. Never attempt to repair the product yourself.
7. TECHNICAL SPECIFICATIONS
Parameter, measurement unit Value
Power, W
40 (2 × 20)
Rated current consumption, A
0.03
Frequency response, Hz 80–20 000
Speaker diameter, mm Ø 47
Input 18V, 2A
Dimensions, mm 762 × 62 × 80
Weight, kg 1.4
Notes. Technical specications given in this table are supplemental information and cannot give
occasion to claims. Technical specications and package contents are subject to change without
notice due to the improvement of SVEN production.