ENG
19
User’s Manual
RX-340
Wireless
This device meets the highest standards of energy conservation.
During long pauses in operation the mouse enters the economical
Sleep mode. To enter the working mode just press any button or
turn the scroll wheel.
Important
•
After finishing work
turn off the mouse with the power switch d (the OFF
position)
.
After this, you can pull out the receiver h from the PC USB port
and insert it into the mouse (Fig. 6).
When using the receiver again, pull it
out from the mouse (Fig. 7) and connect it to the PC USB port again.
• Do not place the receiver into a confined metal space (table drawer, box,
safe), as a metal screen does not transmit radio signals.
• If the battery runs down, the mouse works in jerks. It means that the bat-
tery should be replaced with a new one, as it is shown in Fig. 4.
Fig. 6. Fitting the receiver
into the mouse case
Fig. 7. Extraction of the receiver
from the mouse case
To Next Page
Loading...
