If your set-up doesn’t include an Auto-EQ
feature, adjust the subwoofer volume control
to level-match to your loudspeakers.
For additional guidance on recommended
crossover settings based on your specific
speakers, visit our Subwoofer Matching tool at
www.svsound.com/merlin, or contact the SVS
Sound Experts.
Set the 3000 In-Wall Subwoofer Amplifier’s volume to -10, then run auto-set-up in
your AV receiver/processor. It is important to re-run your receiver’s auto-calibra-
tion set-up if you are upgrading from another subwoofer.
The front panel features an intuitive all-new user interface with controls for adjusting the subwoof-
er’s primary settings. There function buttons are for Volume, Low Pass Frequency, and Phase.
Simply press the setting you want to change and then use the “+” and “-” buttons to adjust the
settings.
Please note, some DSP settings can only be accessed using the SVS app.
The SVS Subwoofer Control App is the easiest way to
access all the advanced control features available on your
3000 In-Wall Subwoofer Amplifier, from the comfort of
your favorite seat. This includes volume, low pass filter,
room gain, phase, polarity, parametric EQ, custom presets,
and more.
Set It Up
System Setup Guide
3000 In-Wall Subwoofer System
Get Control
Get Calibrated
HOME / VOLUME
MOVIE
PRESET
LOW PASS FILTER
OPTIONS
-22
10 050
20 40
200
0
6
4
2
0
-2
-4
-6
-8
-10
-12
PEQ1
ACTIVE
PEQ2
ACTIVE
PEQ3
DISABLED
BOOST: 0 dB
Q FACTOR: 1.2
FREQ: 200
Hz
PARAMETRIC EQ
AUTO EQ - START
MIC INPUT
Please see the other Installation Guide for installing the 3000 In-Wall
Subwoofer and installing the 3000 In-Wall Subwoofer Amplifier with or
without the rack mount kit.
Congratulations on choosing the SVS 3000 In-Wall Subwoofer System, a groundbreaking achieve-
ment in architectural subwoofer design. The following steps will guide you through the quick and
easy setup process.
We strongly recommend reading the 3000 In-Wall Subwoofer Owner’s Manual to get the
best possible performance. You’ll find useful information about amplifier placement, connec-
tions, DSP functions and more.
Your SVS 3000 In-Wall Subwoofer Amplifier can be controlled from the
SVS Subwoofer Control App or via the front panel.
Download The App
On The Subwoofer
For iOS, Android, & Amazon Devices
AUTO / ON
UP (+)
LOW PASS FREQUENCY
PHASE
VOLUME
DOWN (-)
REG
ISTER
Register Your
New SVS Product:
Thank you for choosing SVS! Registering your SVS product expedites any Sound Experts
support requests, confirms your warranty registration and provides a proof of purchase.
Plus, as a registered customer, you’ll be the first to get SVS news and updates.
Register your product now at: www.svsound.com/register
To Next Page
Need help?
General
