AS-EQ1 Operator Manual
© 2009 SV Sound, LLC
•
6420 Belmont Avenue, Girard, OHIO
•
703.845.1472
•
www.svsound.com
SV Sound, LLC
30
Calibrating the AS-EQ1 in Your Listening Environment
1. If you would like to see a preliminary graphical representation of Before and After results of Equalizing your listening
environment, press View Results. (note – until you have permanently saved your results you will see a “DRAFT”
watermark on the Results screen).
2. If you are satisfied with the results of your calibration run, press the
Save Permanently to AS-EQ1 button at which
time the results of your calibration run will be stored in the device and remain until replaced by a subsequent
calibration exercise.
3. If you had changed the speaker size of your Center/Left channel for level setting and measurement,
remember to reinstate the original speaker size settings in your AVR or Pre/Pro.
4. Click the button to continue to the next task
“Create HTML Certificate Document”
To Next Page
Loading...