SVS PC13-Ultra - User Manual

Connect A/V receiver LFE output to subwoofer's low level line in and set switches.

Connect power cord to subwoofer and outlet, turn main power switch ON.

Initiate the A/V receiver's auto-setup function and confirm settings.

Refer to the Merlin matching tool for crossover setting advice.

Connect pre-amp outputs to subwoofer L/R inputs and subwoofer outputs to amplifier.

Set Low Pass filter and adjust gain volume using the Feature Control knob.

Follow instructions, avoid water/heat, protect cord, use approved accessories and carts safely.

Unplug during storms, servicing by qualified personnel only, prevent liquid ingress.

Ensure the mains plug of the power supply cord remains readily operable.