QH_7085H201213E © Swann 2013 |
What are the
additional
connections for?
NVR:
VGA - Connect a TV or
Computer Monitor that has a
VGA port
POE - POE is a technology
built in to our POE NVRs and
Cameras that supplies both
power and video in the one
cable, both NVR and Camera
must support POE for this to
work.
USB - As well as the mouse
you can plug in a USB
memory stick or USB HDD
so you can copy a video of an
incedent recording to give to
the Police etc.
Camera:
Reset Button - Push this and
plug in the power to reset
the camera’s password to
12345 if you forget it.
Power Socket (optional) -
Note: Do not plug the 48Volt
NVR power adapter directly
into your camera as the
camera will be permanently
damaged. If for some reason
you cannot use the POE
power via direct connection
to the NVR then you can plug
a 12v 1A power adapter (not
supplied) in to this socket to
power the camera.
NVR Power
Camera
Video and POE Power
Cable
VGA Cable
(not supplied)
Ethernet
Cable
USB Cable
Reset Button
Power Socket (optional)
Ethernet Socket
Mouse
TV
Monitor
Your Internet Router/
Wireless Router
HDMI
Cable
Hardware Quick Start Guide
To Previous Page
Loading...
