Swann DVR4-1000 - Basic Recording and Playback; Recording and View Management; Playback Operations

10
Changing Camera Views
Push , , or buttons to change between cameras 1-4 in full screen.
Basic Recording
To begin manual recording, press the Record/Stop button when viewing
your cameras. By default, “Each Rec” will appear indicating the DVR is
recording each camera independently. Push the Record/Stop button
again to stop a recording.
Note: The DVR4-1000™ requires at least one camera connected to begin
recording; a “VIDEO LOSS” message will appear if no camera is present.
The DVR4-1000™ will automatically begin recording when powered on if a
camera is connected.
Before Entering the Menu System
You must stop all record modes before entering playback or the main menu
otherwise a Hard Drive Usage message will appear.
Playback Mode
To enter playback mode, press the Play/Pause button. The recordings
will begin playing.
Press the Play/Pause button again to pause the recording.
Press the Fast Forward
button to increase the playback speed by 2X, 4X
or 8X.
Press the Rewind button to reverse playback.
To stop playback and return to live camera view, push the Record/Stop
button.
View List of Recordings
To view a list of all recordings, push the Menu button while in playback
mode. A list will appear with the newest recordings at the top. Move the
cursor using the Up
and Down arrows and push the Play/Pause
button to view the recording.
Push the Record/Stop
button to exit playback and return to the live
camera view.