7
Connecting Cameras and Power
The DVR4-1000™ requires at least 1 camera connected for full functionality.
Follow these steps to connect cameras to the DVR.
1. If you have an extension cable, connect your camera to the
extension.
2. Connect the BNC connector to VIDEO IN, CH1 on the back of the
DVR. If required, use RCA to BNC adapters for RCA cameras
3. Connect the Power connector on the extension cable to your
camera’s power supply
4. Finally connect the DVR’s power adapter to the DC 12V input on
the back of the DVR, and plug in your camera power supply
To Next Page
Loading...
