Swann DVR4-1160 - DVR Layout; Front Panel; Back Panel

Back Panel
1
2
3 4
6
7
8
9
5
1 2
10
11
12
13
15
16
17
18
14
1.Rewind - Press to rewind a
recording / press to move cursor left.
2. Pause - Press to pause a record-
ing. -During display mode press
to activate sequence mode.(SEQ.
DWELL TIME must be set).
3. Play - Press to begin playing
most recent recording.
4. Fast foward - Press to fast
forward a recording / press to move
cursor right.
5. Stop - Press to stop a recording.
6. Record - Press to begin record-
ing.
Note: will not function if the cameras
are not activated in CAMERA SETUP
AND RECORD SETUP.
7. Hard drive indicator - Lights
when hard drive is active (flashes
when recording, searching etc.)
8. Infra red sensor
9. Power Indicator - Lights on
when DVR powered
10. Channel 1 - Press to view
channel 1.
11. Channel 2 - Press to view
channel 2.
12. Channel 3 - Press to view
channel 3.
13. Channel 4 - Press to view
channel 4.
14. Quad Mode - Press to view all
channels in quad mode.
15. Up arrow - Move cursor up in
menus.
16. Menu/ESC - Used to enter the
main menu or exit a sub menu.
17. Down - Press to move cursor
down.
18. Select / Edit - Press to select
an option/enter a sub menu.
3 4 5 6 7
1.Audio Output
2. Audio Input
3. LAN socket
4. Video Output
5. Channel 1,2,3 & 4
6. DC power
7. Grounding Terminal
DVR Layout
Front Panel