Swann DVR4-1160 - Starting the DVR

V2.6
G-V-MLANG
2009.XX.XX
CHECKING HDD........
MASTER [ST3250310SV]
FORMAT HDD CONFIRM
(SELECT) FORMAT / (MENU) CANCEL?
CHECKING HDD........
MASTER [ST3250310SV]
SLAVE [...... NONE]
Once you have connected the DVR and switched the power on it will begin to boot up.
During boot up you will see the following screens
This third screen will only show on first boot up or after a new hard drive has been installed.
Push SELECT to format the hard drive or MENU to cancel the format and continue with the
start up.
Once the DVR has booted up and you have a camera connected to each channel you should be able to
see a quad screen showing all four displays (below).
31 2
1. Displays showing cameras 1 and 3.
2. Audio icon. (in this case audio in ac-
tive on camera 1)
3. Displays showing cameras 2 and 4.
4. Date stamp. (year:month:day)
5. Time stamp. (hour:minutes:seconds)
4
5
Starting the DVR