Once you have connected the DVR and switched the power on it will begin to boot up.
During boot up you will see the following screen. The DVR is basically a small, dedicated
computer and thus needs about 45 seconds to boot up. Whilst booting, the DVR will show this
screen:
Once the DVR has booted (up and you have a camera connected to each channel) the DVR will take you
straight to the ‘ALL’ view screen, showing all eight displays (below).
31
1. Displays showing cameras 1 and 3.
2. Audio icon. (in this case audio in active on
camera 1)
3. Displays showing cameras 2 and 4.
4. Date stamp (year:month:day) and Time stamp.
(hour:minutes:seconds)
4
Starting the DVR
8
To Next Page
Loading...
