Swann H.264 - Front Panel Components; Infrared Sensor; Hard Drive Indicator; Power Indicator

EnglishEnglish
6
Connecting the DVR
Front Panel of the DVR
1 2 3
1 2 3 4
1) Infrared Sensor: Monitors signals coming from the infra-
red remote control. If this sensor is blocked or obstructed,
then the functionality of the remote will be impaired.
2) Power Indicator: This LED is illuminated when the DVR is
connected to power and switched on.
3) Hard Drive Indicator: Lights up when the hard drive is
active. It will ash rapidly when recording or searching (in
time with the read/write cycles).
4) USB 2.0 Port: For connecting USB external storage to the
DVR for backup, or for applying new rmware.
1) Infrared Sensor: Monitors signals coming from the infra-
red remote control. If this sensor is blocked or obstructed,
then the functionality of the remote will be impaired.
2) Hard Drive Indicator: Lights up when the hard drive is
active. It will ash rapidly when recording or searching (in
time with the read/write cycles).
3) Power Indicator: This LED is illuminated when the DVR is
connected to power and switched on.
1) USB 2.0 Port: For connecting USB external storage to the
DVR for backup, or for applying new rmware.
2) Power Indicator: This LED is illuminated when the DVR is
connected to power and switched on.
3) Hard Drive Indicator: Lights up when the hard drive is
active. It will ash rapidly when recording or searching (in
time with the read/write cycles).
4) Infrared Sensor: Monitors signals coming from the infra-
red remote control. If this sensor is blocked or obstructed,
then the functionality of the remote will be impaired.
4
321