EnglishEnglish
8
Connecting the DVR
Connection Diagram
Connect the BNC outputs from
your cameras into the BNC inputs
on the rear of the DVR.
Connect your cameras to
power, using the power-
splitter (if included).
Connect the DC12V
Output from the
power supply to
the power input.
Connect the power
supply to a wall
outlet.
Connect the mouse
to the USB 2.0 port.
If you’ve got a monitor with
VGA but not HDMI, connect it
to the VGA output on the DVR.
If you’ve got a TV or monitor
with HDMI in, connect to
the HDMI port on the DVR.
Connect an Ethernet
cable from the LAN port
on the DVR to a spare
port on your router.
To Next Page
Loading...
