Need help?Do you have a question about the Swann PLATINUM HD and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Compression | H.264 |
| Network Connectivity | Ethernet |
| Video Output | HDMI, VGA |
| Motion Detection | Yes |
| Operating System Compatibility | Windows, Mac |
| Video Resolution | 1080p |
| Storage Capacity | 1TB |
| Power Supply | 12V DC |
| Hard Drive | 1TB HDD |
| Audio Input/Output | RCA |
| USB Ports | 2 |
Equipment tested and found to comply with FCC limits for Class B digital devices.
Jurisdictions have specific laws regarding camera use; buyer must be aware of and comply.
Prohibits using devices to overhear or record private conversations without consent.
Guidelines for safe product installation, operation, and ventilation.
Default login credentials and recommendation to change for privacy.
On-Screen Display configuration for camera name, date, and time.
Adjust image settings like brightness, contrast, saturation, and hue.
Configure motion detection sensitivity and areas for cameras.
Define areas to obscure in the camera's field of view.
Settings to detect and alert when a camera's view is tampered with.
Configure alerts for when a camera loses its video signal.
Video Content Analysis function, not compatible with provided cameras.
Manage directly connected IP cameras and perform firmware updates.
Provides real-time power status for cameras connected via PoE.
Advice on positioning cameras for optimal motion detection.
Setting up recording schedules for cameras.
Advanced recording options, including overwrite function.
Defining periods for alternative recording modes based on holidays.
Manually overriding default recording schedules.
Playing back recorded videos chronologically.
Searching and playing back videos based on specific events.
Isolating and searching video events based on applied tags.
Saving video footage in normal export mode.
Saving video footage specific to motion events.
General system settings including language, resolution, and time zone.
Network settings for remote access, IP configuration, and protocols.
Settings for the RS-232 port, which is not supported.
Settings for live video display modes and output.
Handling and alerting for system exceptions like HDD full or network disconnects.
Managing user accounts, including password changes and additions.
Notification triggered when the NVR's hard drive runs out of space.
Alert for when the NVR has difficulty connecting to the Internet.
Notification when another device has a conflicting IP address.
Alert for incorrect login attempts detected by the NVR.
Notification for unexpected errors during recording capture.
Alert if connected cameras exceed the maximum PoE power capacity.
Notification for difficulties the NVR has accessing the hard drive.
Enables the NVR's internal buzzer to emit an alarm tone.
Alerts the SwannView Plus Windows software installed on the computer.
Sends an email alert when a specific event type occurs.
Overview of NVR settings, options, and device information.
Accessing, searching, viewing, and exporting system logs.
Import or export current NVR configuration settings.
Installing new firmware releases for the NVR.
Resetting the NVR to factory default settings.
Checking network traffic, detection, and status.
Displaying technical specifications and S.M.A.R.T. status of the hard drive.
Updating firmware using a USB flash drive or hard drive.
Updating firmware via FTP, not recommended due to network stability.
Displaying hard drive S.M.A.R.T. information and status.
Settings related to detecting bad sectors on the hard drive.
Details of product warranty coverage, limitations, and responsibilities.
Email address for technical support inquiries.
Toll-free telephone numbers for technical support assistance.
To Next Page