11
F 50
F50 / F75
Doc: 101425E-GB 1406
TRANSPORTATION
It is easy to remove the handle without tools, and the boot
of a standard car is sufcient to transport the machine.
Lifting by hand
Remove the handle by pushing it forward and pull apart the
shafts so that the fastening tabs release.
Stir the handle slightly sideways so that the handle release.
Caution!The machine must be lifted by 2 persons!
Lift by means of the handle on the back and the front edge
of the machine.
Lifting with crane
Tilt the handle forward.
Fit a lifting sling to the lifting eye and thread the lifting
sling between the shafts of the handle, see illustration
below.
Transport locking
Secure the machine with straps according to illustration
during transportation
Note! Secure it by the base plate and not the rubber-
cushioned upper part.
To Next Page
Loading...
