5-13
② When inserting the needle, make sure that the groove
of the needle is facing front. Shaft of the needle should
be inserted completely into the needle bar.
[CAUTION 1]
For special threads such as artificial silk, turn the
needle slightly to the right to prevent thread breaks
(see [Fig.5-20]).
[CAUTION 2]
If the needle is not inserted all the way to the top of the needle bar hole, timing of the machine will go
off, causing broken needles and thread breaks.
[Fig.5-19]
[Fig.5-20]
Needle insert hole
Front groove of the
needle groove
To Next Page
Loading...
