6-4
3) Oiling
① Cored drip-feed lubrication [Standard Type]
㉠ Location and Cycle of Oiling
[CAUTION]
• Use the SWF sewing machine oil (Spindle Oil) or ISO-standard VG18.
• Oil just enough to damp the tape in the oil tank.
[Fig.6-3]
1
Once in 2 days
Where to oil
Oiling cycle
No.
Inside arm
a. driver pin of take-up lever
b. driver pin of presser foot
c. driver shaft of needle bar
To Next Page
Loading...
