EasyManuals Logo

Swift 2004 User Manual

Swift 2004
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Fitted Equipment
85
- It is prohibited to use gas to power the
refrigerator while you are driving. If a
road accident results in fire, there is a
danger of explosion.
- It is prohibited to use gas to power the
refrigerator in the vicinity of petrol
stations.
1. Open the valve of the gas bottle and the
gas taps.
2. Set the gas control button to the 5th
position.
3. Set the energy source selector switch (A)
to
4. Ignite the gas flame:
Automatic ignition (N80E)
- Press the gas control button, rotary
switch (C), and keep it depressed.
- Ignition takes place automatically. You
will hear a ticking noise. If ignition was
successful, the noise will stop and the
flame meter will turn green. Release the
gas control button.
- If the flame goes out, ignition will be
repeated automatically.
- Set the desired refrigeration level by
means of the gas control button, rotary
switch (C). Position 5 is the coldest
setting.
Switching off the refrigerator
1. Set the energy source selector switch (A)
to ;
2. Turn the gas control button, rotary switch
(C) to 0 (Off);
3. The refrigerator is now completely
switched off.
Note!
- The refrigerator is only fully switched off
when both the energy source selector
switch and the gas control button are at
zero. In the case of a refrigerator with
electrical ignition, when the gas control
button is not set to 0, the ignition
mechanism will keep sparking. This can
cause a flat battery.
4. Use the door locking mechanism to lock
the open door. This prevents unpleasant
odours and mould in the refrigerator.
Important!
- If you are not going to use the
refrigerator for a prolonged period, close
the valve of the gas bottle and the gas
taps.
MAINTENANCE
Regular maintenance is necessary to ensure
the correct functioning of your refrigerator.
Cleaning
Tip!
- A good time to clean your refrigerator is
straight after you have defrosted it.
- Clean the refrigerator with a soft cloth
and mild detergent.
- Dust the refrigerator with a soft,
moistened cloth.
- Use a brush or soft cloth to remove
once a year any dust from the
condenser at the inside of the
refrigerator.
Important!
- Do not use soap or aggressive
detergents that are abrasive or soda-
based.
- Make sure that the door closing
mechanism does not come into contact
with oil or grease.
Defrosting
Frost will gradually build up on the
condenser of the refrigerator. You should
defrost the refrigerator as soon as the frost
layer is about 3 mm thick. Frost reduces the
refrigerating capacity and life of your
refrigerator.
Remove the ice cube tray and all food.
Switch off the refrigerator in the way
described previously.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Swift 2004 and is the answer not in the manual?

Swift 2004 Specifications

General IconGeneral
BrandSwift
Model2004
CategoryMotorhomes
LanguageEnglish

Related product manuals