9
Redialling
Note: Numbers which are pressed more than 4 seconds after the last key will not be saved to the
redial buffer.
The redial memory stores the last 5 dialled numbers with 24 digits for each number. If the number is
over 24 digits long, the first 24 digits will be stored to memory.
In stand-by mode:
- Press Redial once, then the last number dialled will be shown on the screen
(If the number is over 13 digits long, the number will move across the screen)
- Press the up or down key to select the number you want to dial
- Pick up the handset to make the call
(the number will be dialled after 2 seconds)
Note: To save the number to a memory:
- Press the Redial key
- Choose the desired entry using the up or down key
- Press OK to confirm
- Choose the desired memory using the up or down key:
Phonebook
M01 – M05 5 memory keys at the right
M2 – M0 (keys 2 to 0) Speed-dial keys (numeric keys)
- Press OK to confirm
- Edit the number using the keypad
- Press OK to confirm
- Press keys to edit the name. To switch to capitals and back please press the * key.
- Enter the name via the keypad and press OK to save the data.
In the off-hook state:
- Press Redial
- Choose the desired entry using the up or down key
- Press Redial again (the number will be dialled immediately)
Note: The redial list can be deleted by the Reset 1 function.
USING THE PHONE
To Next Page
Loading...
