Swisscom Aton C26 - Ringer Tone Setting

While in the idle mode, press the Menu key to enter the menu operation. Press the up/down key to
select the desired item. The timeout for the setting mode is 20s. The possible settings you can make are
stated below:
Ringer tone setting
- Press the Menu key while in idle mode
- Select Ringer Tone with the up/down key and press OK
- Select the desired ring tone and press OK.
Ringer volume setting
- Press the Menu key while in idle mode
- Select Ringer Sound with the up/down key and press OK
- Select the desired ringer volume and press OK.
Contrast setting
- Press the Menu key while in idle mode
- Select Contrast with the up/down key and press OK
- Select the desired contrast and press OK.
Flash time setting
- Press the Menu key while in idle mode
- Select Flash Time with the up/down key and press OK
- Select the desired flash time (100 or 300ms) and press OK.
Date/time setting
If the date and time are transmitted by the telephone network, the setting will be made automatically
during an incoming call (except for the year).
- Press the Menu key while in idle mode
- Select Date/Time with the up/down key and press OK
- Enter the date and the time with the keypad (DD/MM/YY hh/mm)
- Press OK.
15
MENU SET-UP