EasyManua.ls Logo

SWM VAREZ 125 - MULTIFUNCTION DISPLAY DETAILS

SWM VAREZ 125
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 12
Engine Coolant Overtemperature Warning
Light
The symbol turns on when the engine is overheated.
- Stop the motorcycle, turn o the engine and check
that the coolant level inside the tank is not below the
MIN notch. In this case, wait for the engine to cool
down, then slowly and carefully open the plug, top up
with coolant, making sure that the level is between
the MIN and MAX notches on the reservoir.
- Also visually check any coolant leaks.
- If the symbol lights up again upon the following start
up, contact an SWM Dealer.
Fuel Reserve Warning Light
When the ignition key is turned, the light comes on for
a few seconds and then goes o.
If the light comes on while riding the motorcycle, it
means that the fuel has gone into reserve
(3 litres),
and the riding autonomy is limited. Refuel as soon as
possible.
MULTIFUNCTION DISPLAY
1. Odometer:
Indicates motorcycle speed.
2. Speed scale indication:
km/h = kilometres/hour
mph = miles/hour
3. Display parameters:
The following parameters that will be displayed in
the eld (4) can be individually set in this eld.
- CLOCK = Clock (See Clock settings).
- ODO = Odometer (read-only value).
- TRIP = Partial odometer (see TRIP settings).
5.  Unit of measurement:
- Mile = indicates that the value indicated in the
ODO and TRIP functions is in miles.
- km = indicates that the value indicated in the ODO
and TRIP functions is in kilometres.

Table of Contents

Related product manuals