SWM VAREZ 125 - CONTROLS; IGNITION SWITCH

EN - 16
IGNITION SWITCH
The ignition switch has three positions:
motorcycle start position
(non-removable key).
key removal position.
steering locking position
(removable key)
• Key removal position
Turning the key to position, the engine and the
lights go o and you can remove the key from the
ignition switch.
• Start position
From key removal position, turn the key (1) clockwise
to position. Lights and display come on, and the
motorcycle can be started.
STEERING LOCK
The motorcycle comes with a steering lock located on
the ignition switch (1).
Lock the steering as follows:
- Turn the handlebar to the left or to the right.
- Insert key (2) into the ignition switch (1) to position
- Press the key (2) and turn it anticlockwise to
position.
- Remove the key (2).
- To unlock the steering, follow the above procedure in
reverse order.
HANDLEBAR SWITCHES
The right-hand switch features the following controls:
1. Engine start button.
Pressing the button (1) with the key in position,
the switch (2) in position and the gear shift
in neutral position or the clutch pulled, starts the
engine.
2. Engine KILL SWITCH.
- Flicked to position, it disables engine starting
and running.
- Flicked to position, it enables engine starting
and running.
Right-Hand Side
CONTROLS