Installation
22
5. Secure the arm with cable ties
Make sure your pedal arm is clean.
Loosely cable tie the magnetic disc
arm to the inside of your pedal arm
in at least two points.
Reposition the magnetic disc so
that it is aligned as seen in the
picture. Check that the alignment
is correct by rotating the pedal arm
backwards and watching for any
movement.
After checking the alignment,
tighten the cable ties and bolts
completely.
5.1
5.2
5.3
5.4
Note
For small pedal arms, thread the
cable ties through the holes to
improve and tighten the grip.
To Next Page
Loading...
