Installation
21
4.
Fit the retention ring
Fit the retention ring around the
magnetic disc to secure the two
sides in place.
4.1
3.
Fit the universal magetic disc
Fit the magnetic disc around the
crank axle, behind the pedal arm,
on the side of the bike opposite the
chain.
The side of the disc with ‘Working
Surface’ written on must face the
bike frame.
Push and click together the two halves
of the magnetic disc.
3.1 3.2
Note
If there is enough
room, add the
middle pieces to
improve strength
with a tighter fit.
To Next Page
Loading...
