19
V1.97
can gradually initiate in between
boost cycles as well.
E.g., If - Expect a partial
boost even when vaping before the 30s mark.
will be followed by chosen curve.
Turn Smart-Boost feature On/Off
Set your power percentage.
(100% represents your base wattage)
How long the boost should be active.
How long before your coil gets cold,
and requires a full boost again.
Big mass coils might need a stronger pre-heat to reach the
set wattage quicker. But your second, third, and so forth
consecutive draws do not.
Smart Boost allows you to set a custom pre-heat for these
rst draws when the coil is cold. Consecutive draws (chain
vaping) will get a lower pre-heat power %.
To Next Page
Loading...